Exhaust Brake Adapters
When installing an exhaust brake there are two different mounting configurations. One of the most typical exhaust brake installation is the InLineMount.
For this type of install adapters are required to seal the airflow from the exhaust brake to the exhaust pipe. They are mounted on either side of the brake and clamped into place. The second type of exhaust brake, for Dodge 2003 and newer vehicles, are exceptions
as they are installed using a DirectMount confi guration. This type of install does not require adapters as one side of the brake attaches directly to the turbocharger and the other side directly to the exhaust pipe.
Pacbrake’s exhaust brake adapters are stainless steel* and have machined flanges so that they are perfectly matched when connected to the exhaust brake housing. The adapters combined with the stainless steel* V-Clamps, ensure that there is a perfect airtight seal between all exhaust brake joints.
- Stainless steel (where applicable)
- Precision machined flanges
- No gaskets required
See the EXHAUST BRAKE REPLACEMENT PARTS GUIDE table to find the specific part numbers of replacement adapters and clamps for Pacbrake exhaust brakes