HP10256 (Premium) Paddle Valve In-Cab Control Kit w/ Digital Gauge, Independent Fill

Overview

Take your towing, hauling, 4x4'ing and all other onboard air management to the next level with Pacbrake's Paddle Valve In-Cab Controls!

Premium kits include everything you need to operate your Air Springs (or other pneumatic accessories) right from the driver's seat.

Product Description

Pacbrake's Premium Paddle Valve In-Cab Control Kits with Digital Gauge display offers the simplest method for 'Independent' Air Spring or pneumatic accessory activation with the push of a button.

Independent Activation (or Inflation) is simply two separate switches that allow for inflation/deflation of each Air Spring individually.

A comparable Premium Simultaneous Activation Kit (HP10231) is also available for those that want both Air Springs adjusted together at the same time with the push of one button.

Digital Gauges display pressure from 0psi to 220psi at 1psi increments allowing for continuous monitoring and adjusting of your Air Spring pressure.

This Kit Includes:

12VDC HP325 Series Compressor — Chrome finish
Paddle Valve Dash Switches w/ Digital Gauge — Independent Activation
Pre-Built Harnesses
All Fittings, Fasteners and Installation Hardware for a complete and hastle free install

This kit does not include an Air Tank (sold separately):

HP10053 — 1/2 Gallon Air Tank — (Black Steel)
HP10266 — 1/2 Gallon Air Tank — (Polished Aluminum)
HP10050 — 2 ½ Gallon Air Tank — (Black Steel)
HP10267 — 2 ½ Gallon Air Tank — (Polished Aluminum)

PLEASE NOTE: If adding an air tank, a pressure switch is required; HP10110 for 105-135 PSI / HP10111 for 85-105 PSI

WARNING: this kit cannot be used with an Air Tank larger than 2 ½ Gallons

Vehicle Application

Universal

Application Notes

If adding an air tank, a pressure switch is required;
(HP10110) for 105-135 PSI / (HP10111) for 85-105 PSI
Digital Gauges require a minimum of 6" (101.6mm) of clearence behind the bracket for routing of the air line

Features

Operate your Air Springs (or other pneumatic accessories) right from the driver's seat
Independent Activation/Inflation; inflates/deflates each air springs individually

MANUALS, GUIDES & DOWNLOADS

12 VDC 325 SERIES COMPRESSOR — FILL TIMES
TANK SIZE	TANK PART #	0 to 100 psi	100-150 psi
1/2 Gallon	HP10053 / HP10266	23 seconds	23 seconds
2 1/2 Gallon	HP10050 / HP10267	157 seconds	130 seconds

*PLEASE NOTE: Opreating life may be dependant on application

12 VDC 325 SERIES COMPRESSOR — SPECIFICATIONS
GENERAL DATA
Part Number	HP10142 / HP10142-B
Weight	5.5 lbs [2.49 kg]
Ambient Temperature Range	-40°F to 158°F [-40°C to 70°C]
Max Duty Cycle	33% (20 minutes @ 100 psi)
Ingress Protection	IP55 w/remote intake (included)
PNEUMATIC DATA
Rated Flow	1.1 SCFM
Max Working Pressure	150 psi [1034 kPa]
Max Restart Pressure	135 psi [931 kPa]
ELECTRICAL MOTOR DATA
Motor Type	Permanent magnet DC
Operating Voltage	12 VDC ± 15%
Maximum Current Draw	17 A
Nominal Power	1⁄4 HP
Nominal Speed	3000 RPM