Shop All

The HP10002 kits only fit the MEGA CAB version of the 1500. HP10002 kits fit with the 3349 and 3319 superglide 5th wheel rail kits on 4WD vehicles. For 2006-2018 Dodge RAM 3500 (2WD/4WD) Chassis Cab, the HP10136 must be purchased and for 2019-2020 Dodge RAM 3500 (2WD/4WD) Chassis Cab, the HP10349 must be purchased for vehicles that have a round axle tube with the breather located approximately 7'' from the spring pack.

The HP10002 kits only fit the MEGA CAB version of the 1500. HP10002 kits fit with the 3349 and 3319 superglide 5th wheel rail kits on 4WD vehicles. For 2006-2018 Dodge RAM 3500 (2WD/4WD) Chassis Cab, the HP10136 must be purchased and for 2019-2020 Dodge RAM 3500 (2WD/4WD) Chassis Cab, the HP10349 must be purchased for vehicles that have a round axle tube with the breather located approximately 7'' from the spring pack.

Will not fit Cab & Chassis models. *4WD vehicles equipped with a rear sway bar or camper package need the HP10540 retrofit kit. Will fit F-350 DRW models.

Will not fit Cab & Chassis models. *4WD vehicles equipped with a rear sway bar or camper package need the HP10540 retrofit kit. Will fit F-350 DRW models.

• Will not fit TRX models or vehicles with factory air suspension

• Will not fit TRX models or vehicles with factory air suspension

• 1.5" or 2.25" Lift. Maximum tire size - 33"

• 1.5" or 2.25" Lift. Maximum tire size - 33"

For all truck bed lengths. Will not fit models equipped with Adaptive Ride Control. AT4/Trail Boss - requires 2" spacer.

For all truck bed lengths. Will not fit models equipped with Adaptive Ride Control. AT4/Trail Boss - requires 2" spacer.

• Will NOT fit Raptor, Tremor, or models equipped with Continuously Controlled Damping (CCD).

• Will NOT fit Raptor, Tremor, or models equipped with Continuously Controlled Damping (CCD).

For use with single or double convoluted air springs.

For use with single or double convoluted air springs.

For C Channel Frames. If the frame to axle pad distance is 7.25'' or less, use kit HP10120.

For C Channel Frames. If the frame to axle pad distance is 7.25'' or less, use kit HP10120.

Not for commerical chassis cabs.

Not for commerical chassis cabs.

• Will not fit with factory optional air equipped vehicles

• Will not fit with factory optional air equipped vehicles

• Will not fit Mega Cab or TRX Models
  
• The factory RAM 1500 front upper control arm is known to have issues with the ball joint "popping out" of the upper control arm, whether at stock ride height or leveled / lifted. It is recommended to upgrade the front upper control arms as a precaution

• Will not fit Mega Cab or TRX Models
  
• The factory RAM 1500 front upper control arm is known to have issues with the ball joint "popping out" of the upper control arm, whether at stock ride height or leveled / lifted. It is recommended to upgrade the front upper control arms as a precaution

• The Premium In- Cab Control kit comes complete with a 12 VDC Air Compressors, wiring harness, mounting fasteners, fittings, and more. This kit is on demand and intended to use without an air tank.

• The Premium In- Cab Control kit comes complete with a 12 VDC Air Compressors, wiring harness, mounting fasteners, fittings, and more. This kit is on demand and intended to use without an air tank.